TAD 30-125W, 40-150W Peak Power AC-DC PSUs Offer Extended Performance to 85 Degrees in Multiple Mechanical Formats

The TAD30-P, TAD65-P and TAD125 chassis mount PSUs offer unrivalled thermal performance at -40 to 85 degrees with a peak load capability.

The family offers a comprehensive mechanical list of variants; open frame (and board mount for TAD30-P), TAD65-P and TAD125 also offer U channelcovered and DIN rail mount versions. All the units have a wide range of voltage outputs from 3.3 to 53VThe high temperature of operation make these units the ideal choice for installations in a sealed enclosure where additional heat can build up, or where thermal management is difficult 

The units offer IEC 62368-1, the latest in safety approval for ITE and AV equipment, and certified to EN55032 level B conducted and radiated (radiated level A only for TAD125). The isolation voltages are higher than usual permitting operation to 5km; input to output 4kV, input to ground 1.5kV. 

The units are featured with output voltage adjust of up to -20% to +10% to trim to a required voltage, for example for volt drop compensation on long cables.   

TAD 30-125W, 40-150W Peak Power AC-DC PSUs Offer Extended Performance to 85 Degrees in Multiple Mechanical Formats

For more info on our AC-DC chassis mount products please click below:

Chassis mount AC-DC

The 5 year warranty and mechanical versatility make the TAD a great choice for the system designer where peak loads or high ambient temperatures are expected. Should you want to evaluate a sample please contact your FiDUS Power Account manager

TAD30-P Information

TAD65-P Information

TAD125 Information

Can’t find what you are looking for?

Call us 01183 420730

Contact Us